JRSS screw jacks have compact structure and small size.

    Easy installation and many ways.

    High reliability and long life.

    JRSS screw jacks have various functions such as lifting, descending and pushing and turning with auxiliary parts.

    It can be used as a single unit or in multiple units.

    Wide range of power sources, can be driven directly by electric motor or other power, and can also be used manually.

    Usually used for low speed and heavy load occasions. Widely used in metallurgy, machinery, construction, water conservancy, medical, chemical and other industries.

    Application Notes

    Please select the appropriate speed ratio and the lift with sufficient margin of load according to the load capacity table.

    The temperature of the surface of the reducer and the surface of the lift nut should be controlled at -15℃～80℃ when the lift is in operation.

    The lift shall not run continuously, and the load moment rate (T%) of a single lift shall not exceed 20% when accounting for 30 minutes.

    It is necessary to ensure that there is sufficient driving source power.

    JRSS screw lifts theoretically have a self-locking function, but the self-locking function will fail in the occasion of large oscillation shock, please must add braking equipment.