Hangzhou City, Zhejiang,China

+86-571-87386872

sales@yndreducer.com

YND MACHINERY

Reducer production company

PORDUCT

Product Detail

UDL-B5

  • 商品说明

UDL series stepless transmission can be commonly used in food, packaging, chemical, pharmaceutical, hope material, this paper, machine tools, transportation and a variety of predetermined speed of automatic consumption lines, bail line, device assembly line, is your ideal reducer

1. Precision planetary reducer with high precision: up to 0.5-1 rpm.

2. The speed of change is large, the output speed ratio can be changed at will between 1:1,4 and 1:7.

3. High strength, long life.

5. can change the operation, and can work in both positive and negative direction, smooth operation, stable function, low waiting sound

6. Fully sealed, low requirements for the environment

7. The structure is compact and small in size.

8. The use of high-quality aluminum alloy and cast iron box.

UDL series stepless transmission can be combined with various kinds of reducers to complete low-speed stepless speed change.

10. Output speed display

11. Fast hand wheel: straight shake can not see the speed.

12. Pointer handwheel: the speed shown on the pointer and theoretical output shaft speed has a 30-5 ° turn error.

13. Digital speed meter: the speed and theoretical output speed of the complete divergence.

14. Operation with degree, stable operation

15. Parts break-in (empty machine operation) at the beginning, the temperature rise can be higher than the temperature of the ring grave 400-50 °, when the operation of 60-80 hours, the temperature components, new lower. The temperature is about higher than the ambient

16. temperature of 25 °, and adhere to the stable.

17. Note: If you use a 2-stage motor, the temperature rises 100-20 countries normal

18. Run bone and exchange period

19. Please use (Ub-1) or (Ub-3) special traction oil for the transmission of MB gearbox, and the oil level should not be lower than the center line of the oil mark.

20. Exchange after 1000 hours of work

21. After that, exchange after 2,000 hours, and shorten the exchange period in the case of bad operation.

22. MB transmission gears into the speed box and X3 below the oscillating speed selection of disulfide phase to the bone or lithium base bone. In the factory has been involved in a job in 12 months

23. Stop exchanging.


Technical Support: 淄博大漠网络 | Admin Login
×
seo seo