UD/UDL/UDT series stepless speed changers are optimized and planned with the domestic advanced stepless speed regulation model. Its characteristics: high speed regulation accuracy: up to 0.5-1 rpm. Large speed change planning. The output speed ratio can be changed at will between 1:1.4 and 1:7. Choose high-quality aluminum alloy die-casting molding, beautiful appearance, light weight, never rust. Good compliance. This product can be combined with various reducers to end low-speed stepless speed change.

Precision planetary reducer product features.

1. High accuracy of speed regulation, up to 0.5-1 rpm.

2. Large speed change planning, speed ratio can be adjusted between 5 times at will.

3. High strength, long life.

4. Smooth operation, low noise, stable function, can be connected to the wheel operation, but also reverse operation.

5. Easy speed regulation, compact structure, small volume.

6. Fully sealed, strong environmental compliance.

7. Good compliance, and reducer combination to end low-speed stepless variable speed. Choose high-quality aluminum alloy die-casting molding, beautiful appearance, light weight, and never rust.

Product maintenance.

    Newly put into operation UD/UDL/UDT series planetary cone stepless transmission, factory has injected UB-3 stepless special oil, after 200-300 hours of operation, should be the first consecutive oil change, in the future use should be regularly check the quality of the oil, about mixed with impurities or metamorphosis of the oil must be timely communication. Under ordinary circumstances, the machine of the long starting wheel operation, according to the operation of 5000 hours or once a year to communicate new oil, a long time out of use of the machine, before the start of operation should also communicate new oil, the machine should be involved with the original trademark of the same oil, not mixed with different trademarks of the oil, the same trademark and different viscosity of the oil allowed to be mixed. Oil change should wait for the machine to cool down without stopping the risk of continuous, but should still adhere to the warm, because after complete cooling, the viscosity of the oil increases, the oil release is difficult. Attention: to block the transmission equipment power supply, to avoid unintentional power! In operation, when it is found that the oil temperature rises above 80℃ or the oil pool temperature exceeds 100℃ and the onset of abnormal noise and other phenomena should be used continuously, check the cause, it is necessary to clean up the defects and communicate the lubricant before continuing operation. The user should have reasonable rules and regulations for the use and maintenance of the machine, the operating conditions and problems found in the inspection should be carefully recorded, and the above rules should be strictly implemented. In the process of use, if the customer finds quality problems, please do not first disassemble, should first contact with the company, clarify the situation, after admitting the problem, choose the more ambitious way to implement the disposal.