In the reducer family, the planetary reducer is widely used in the servo, step, DC and other transmission systems for its small size, high transmission efficiency, a wide range of deceleration range and high precision. Its function is to ensure the precision transmission, which is mainly used to reduce the speed increase torque and reduce the load / motor moment of inertia ratio. In the past few years, some users in the use of reducer, due to illegal installation and other factors, resulting in the output shaft of the reducer broken, so that the enterprise suffered unnecessary losses. Therefore, in order to better help the majority of users to use the reducer, we will give you a detailed description of how to properly install planetary reducer.

Correct installation, use and maintenance of reducer are important links to ensure the normal operation of machinery and equipment. Therefore, when installing planetary gear reducer, be sure to strictly follow the following installation and use of related matters, conscientiously assemble and use.

The first step

Before installation, confirm whether the motor and reducer are intact, and check the size of each part of the motor and the reducer. This is the size and tolerance of the motor's positioning protruding platform, the input shaft and the reducer.

Second steps

Unscrew the screws on the outer side of the flange of the reducer flange, adjust the clamping ring of the PCS system, make the side holes aligned with the dustproof holes, and insert them into six corners to tighten. After that, take the shaft key of the motor.