Performance characteristics. 

1、Output speed：6.9～460r/min 

2、Output torque: up to 1500N.m 

3、Motor power: 0.075KW～3.7KW 

4、Installation form: H-foot type V-flange type

Product features.

1, G series reducer fully enclosed full life electromechanical integration design;

2, G fully enclosed gear reducer hardened helical gear transmission, low noise, high efficiency;

3, gear reducer overall structure, light weight, strong adaptability;

4、Electromagnetic brake can be attached.

CPG precision planetary reducer is a kind of independent transmission apparatus used to reduce the speed and increase the torque. The reducer is an independent closed transmission equipment with the original motor and the operating machine, generally used to slow down the speed and increase the torque to suit the needs of different operating occasions, such as demand can also be used to increase the speed, so as to be a speed increaser. Selection and purchase should be based on the needs of their own use and the selection of operating conditions and technical parameters of the machine and other factors of reasonable choice.

　　The composition of the speed reducer contains transmission parts (divided into gears, worm gears), shafts, bearings, boxes and additional equipment. The general structure can be divided into the following three major parts.

1、Gear, shaft and bearing combination

　　The most important component of the speed reducer is composed of gears and bearings of different sizes, which bite each other and play the role of deceleration according to certain combinations, and are fixed inside the box through the shaft. Gears and shafts, bearings are forged from high hardness and wear-resistant materials, which is the core, so a good choice of gears with a dozen years will not have quality problems.

 2、Housing

　　Box is also an important component of the reducer. He is the foundation, all the parts are installed in the box, all the box should have sufficient strength sealing and hardness, to ensure the stability of the machine, to ensure that the lubricant does not leak. Gray cast iron has very good casting function and vibration damping function and become the material for making the box. In order to facilitate the installation and disassembly of the components, the box is mostly made along the axis of the horizontal split type. The upper box cover and the lower box body are bolted together as one.

3、REDUCER ACCESSORIES

　　In order to ensure the normal operation of the reducer and other functions, in addition to the gears, shafts, bearing combinations and the structural design of the box to give sufficient attention to other accessories, there are generally fans used to dissipate heat, there is a brake emergency to stop the work of the reducer, etc., these are the composition of the CPG reducer can not be short of parts.